• Email: sales@conoflex.co.uk
    Phone: 01892 664 388
    Fax: 01892 664 178

Source Estuary Match

Cono-flex SOURCE Estuary Match 13ft. Optimum Casting Weight: 3-5oz

The Cono-flex SOURCE is a top performance sea match rod with results to prove it. The main strengths of the rod were the great bite detection with a nice casting action suitable for small soft baits. So when we were asked if it was possible to produce a rod with the same characteristics but at a more affordable price we assessed the situation.

The need for such a rod was because the angler has his all-rounder fishing rod, but also requires a second choice rod when fishing conditions change to scratching around for flounder or whiting, but not costing him the same price as his main rod.
The Cono-flex Flattie Fanatic has filled this role very well till you need that extra length, so let me introduce you to the Cono-flex SOURCE Estuary Match, all the qualities of the top performance SOURCE but easier on the pocket.

MADE WITH THE ANGLER IN MIND

Source Estuary Match Factory Build Details

Price £283.54

*Factory Build Cono-flex SOURCE Estuary Match 13ft.

Cono-flex Source Estuary Match 13ft:

  • Tip Length: 7ft 4 inches
  • Butt Length: 5ft 8 inches with spigot
  • Tip Diameter: 3.5 mm
  • Butt Diameter: 24 mm
  • Blank Weight: 720 gms

Source Estuary Match Blank Only Details

Price £193.54

*Blank details Cono-flex SOURCE Estuary Match 13ft.

Source Estuary Match Blank Guide Spacing

Top row is distance between guides in inches - centre to centre. Lower row is size of guide - using Fuji as standard.

Note: The rings detailed are the intermediate guides, you will have to order the appropreate tip guide as well.

Source Estuary Match Guide Spacing
3
3 1/2
4
4 1/2
5
6
8
10
12
16
10
10
10
10
12
12
16
16
20
25

 

 

 

General Purpose & Mixed Ground

Cono-flex Rods & Blanks

Cono-flex General Purpose or Mixed Ground Rods to cast 5 to 6 oz, with a medium tip to suit a wide variety of venues and situations.

Sliding Reel Fittings

CAUTION: Conoflex cannot recommend the type of sliding reel fitting that uses a single end of the reel foot as a clamp.

This design creates a local pressure point and can cause the butt to go oval, which can lead to failiure when used with the reel in the top hand.

Instead use a reel fitting with a clamp based on a coaster or collet design.

Rod Reviews

In the Cono-flex Gallery we have a number of rod reviews and images of our rods in action. Click here to view reivews.

Email Conoflex    Catch Conoflex on Facebook     Catch Conoflex on Twitter